UNM Physics and Astronomy Department Web Site
University of New Mexico Department of Physics and Astronomy
Search PandA

Buildings
Building Information
Custodial Services
Desk and offices
Keys & Locks
Maps
Vehicles & Parking
Complaint Department
Who to complain to?
Operations Job Lists
Equipment/Materials
General Equipment Issues
Equipment give-a-ways/transfers
Inventoried Equipment (Has a tag)
Non-Inventoried Equipment (No tag)
Warehouse Items
Who owns this equipment? (LOST & FOUND)
Book & Library Items
Safety
Building
Chemical
Electrical
LASERS
Manual locations
Radioactive Materials
SHEA Web pages
Services provided by Operations Personnel
Listing of services
Shipping & Receiving
General Info
Tracking incoming packages
Tracking shipped packages
Policy for packages received
Policy for shipping of items

This page last updated on 5/23/2006 @ 11:30

Electrical Safety

Wherever there is an electrical panel (circuit breakers or fuses), disconnect switch, or electrical box/panel with a hinged or removable cover, there is to be left a 2' wide x 3' deep, clear area, from floor-to-ceiling in front of the device. No tables, chairs or any other item to be placed in the area whether moveable or not.

There are to be no extension cords used for other than temporary service (a maximum of 90 days), nor shall there be any serially connected extension cords for any length of time. No extension cords are allowed across doorways, hallways, or any floors in a pathway of human travel (tripping hazards).

There are to be no plug strips, whether circuit protected or surge protected used at the end of any extension cord, or another plug strip. These may only be plugged directly into a wall or floor outlet.

There are to be no old surge protectors in use. Old is considered to be anything over 7 years old. They must be replaced after this length of time.

There are to be no space heaters unless they are equipped with a safety tip-over switch.

All wiring should be in enclosed sheathing, conduit, or boxes designed for their particular use, and properly taped or having wirenuts applied to connections.

Multiple extension cords may not be used in series with or without taped over connections.


Comments/questions about this web page? Email webmaster@phys.unm.edu